Archive - February, 2011

Mercruiser 6.2L MPI Marine Exhaust Replacement Kit

Wednesday, February 23rd, 2011

Thanks for your inquiry and the opportunity at earning your business. I’m not exactly sure what parts you are looking for. Please see the link below for additonal information. Using the links below you can add your selected product(s) to your shopping cart and the shipping estimator located at the bottom of the shopping cart page will give you a shipping cost based on your specific postal code. Let me know if you need any further technical information or help placing your order. In either case I will be glad to assist!

Link to Exhaust System
http://tinyurl.com/4k598k2

Link to Online Parts Catalog
http://tinyurl.com/yztnl74
Regards

Performance Product Technologies/IShopBoating
8002 West 6th Street
Stillwater, OK 74074
(405) 533-3812
Fax (775) 257-1769
sales@perfprotech.com
www.perfprotech.com
From: Andy 
Sent: Wednesday, February 23, 2011 11:52 AM
To: PPT – Marine Engines & Parts
Subject: Exhaust monifold assembly of Mercury – MRF 10384

Hi Sales,

Could you pls priority help to send me quotation full set for Exhaust monifold assembly of Mercury (Mercruicer) Model: M x 6.2 MPI – 320 HP Engine (as per attachment).

  • Share/Bookmark

1993 SeaRay 17 Bowrider 3.0L Mercruiser Marine Engine Replacement

Wednesday, February 23rd, 2011

Anthony,

Thanks for your inquiry and the opportunity at earning your business. Things have changed significantly regarding the new engine emissions rules. Please check out the link below that will explain these changes for you. After reviewing this information just let me know which option makes the most sense for your particular situation. Let me know if you need any further technical information or help placing your order. In either case I will be glad to assist!

Link to Article that Covers the Engine Repowering Options
http://www.perfprotech.com/store/articles/new-emissions-rules.aspx

Regarding your specific question regarding replacing an inline engnie with a V engine, the mounts are not the same and therefore require modifications to the boat stringers. The other issue is that the gear ratio of your sterndrive would not match up either due to the increase in Hp.

Regards

Performance Product Technologies/IShopBoating
8002 West 6th Street
Stillwater, OK 74074
(405) 533-3812
Fax (775) 257-1769
sales@perfprotech.com
www.perfprotech.com

From: ProductLeadForm@perfprotech.com [mailto:ProductLeadForm@perfprotech.com]
Sent: Wednesday, February 23, 2011 10:55 AM
To: PPT – Marine Engines & Parts
Subject: Product Lead Question: Engine – Mercruiser CPO, 4.3L, 2V Carb, Alpha (#CPO865108R44)

Anthony writes:
I currently own a 1993 Sea Ray 17′ bowrider with a 3.0L Merc engine and would like to uprgade the engine to a 4.3L. Will this engine work with the existing sterndrive (Alpha 1) and engine mounts? I know that I will have to rework the exhaust, but what other items will I be required to modify? Your help is greatly appreciated.
This customer was last viewing the following page:
http://www.perfprotech.com/store/product/Engine-Mercruiser-CPO-43L-2V-Carb-Alpha-CPO865108R44,196631.aspx

  • Share/Bookmark

1997 Bayliner 2452 Marine Engine Replacement

Wednesday, February 23rd, 2011

Jesse,

Thanks for your inquiry and the opportunity at earning your business. Those boats were built with several different engine options that were matched to the corresponding drive. Please provide more information regarding what you are looking to do. Let me know if you need any further technical information or help placing your order. In either case I will be glad to assist!

Regards

Performance Product Technologies/IShopBoating
8002 West 6th Street
Stillwater, OK 74074
(405) 533-3812
Fax (775) 257-1769
sales@perfprotech.com
www.perfprotech.com

From: ProductLeadForm@perfprotech.com [mailto:ProductLeadForm@perfprotech.com]
Sent: Wednesday, February 23, 2011 5:21 AM
To: PPT – Marine Engines & Parts
Subject: Product Lead Question: Article Category

jesse writes:
what are the correct engines for 2452 bayliner 1997 ?
This customer was last viewing the following page:
http://www.perfprotech.com/store/catalog/Small-V8,7328.aspx

  • Share/Bookmark

Mercruiser 4.3L V6 Single Piece Exhaust Water Ingestion

Wednesday, February 23rd, 2011

Robert,

Thanks for your inquiry and the opportunity at earning your business. A couple of things for consideration regarding the exhaust. First – The 4.3L engine does not have the same restriction issues as the small and big V8’s therefore the performance benefits are not as great as would be expected when installing a performance exhaust system onto those engines. This is the case especially when the exhaust restriction is due to the exhaust system out of the boat ratehr than out of the enigne. Second – The 4.3L engine is an opposite bank fired engine on every power stroke with no same side cylinder firing from the same bank. This is different from all the V8’s and allows for a pressure wave to be generated that never gets eliminated by same bank firing. Without going into too many details I would just say that the 4.3L engine is very suceptible to water ingestion issues when tuned exhaust is installed. Thus the reason Mercruiser discontinued the tuned single piece design for this particular engine. I’m familiar with this having been the engineering manager for the exhaust and cooling department at Mercruiser from 1991 through 2002. Third – No one regulates any of the manufacturers claims so you have to take them with a grain of salt. Truth be known the difference in performance between the Mercruiser 2 piece exhaust and their fully tuned single piece exhaust that yielded approximately 10 additional Hp, in almost all cases did not attribute to any measurable performance gains in a boat. Therefore with all of this at hand I feel comfortable in saying that all fo the products will yield about the same results. Realizing the water ingestion issues with the V6 engine specifically, we targeted the weight benefit in conjunction with the corrosion resistance of the coated product line versus specifially trying to go after performance gains. You can add your selected product(s) to your shopping cart and the shipping estimator located at the bottom of the shopping cart page will give you a shipping cost based on your specific postal code. Let me know if you need any further technical information or help placing your order. In either case I will be glad to assist!

Link to Our Related Patents
http://tinyurl.com/kwzdse

Aluminum Exhaust Systems
http://tinyurl.com/3yoz4kf
Regards

Performance Product Technologies/IShopBoating
8002 West 6th Street
Stillwater, OK 74074
(405) 533-3812
Fax (775) 257-1769
sales@perfprotech.com
www.perfprotech.com
From: ProductLeadForm@perfprotech.com [mailto:ProductLeadForm@perfprotech.com]
Sent: Tuesday, February 22, 2011 8:07 PM
To: PPT – Marine Engines & Parts
Subject: Product Lead Question: Exhaust Kit – Mercruiser, 4.3L, Coated, Aluminum (#EK-MERC-43L-C-NS-AL)

robert writes:
I am considering aluminum manifolds for my4.3 mercruiser. Imco and Glm claim performance benefits in the 5-7% range due to internal design{individual runners}what performanc gains should i expect with your product? Because i slip my boat in brackish water, i am interested in your ceramic infused manifolds. Besides the weight saving, i am also looking for a bit more performance.
This customer was last viewing the following page:
http://www.perfprotech.com/store/product/Exhaust-Kit-Mercruiser-43L-Coated-Aluminum-EK-MERC-43L-C-NS-AL,170964.aspx

  • Share/Bookmark

Mercruiser Single Piece V6 Exhaust Conversion Kit

Wednesday, February 23rd, 2011

Steve,

Thanks for your inquiry and the opportunity at earning your business. Actually this kit is used when replacing standard 2 piece exhaust. In your case when repalcing the single piece you would need to order the kit listed at the link below. This kit includes the needed intermediate elbows and additional bellows required for your conversion. You can add your selected product(s) to your shopping cart and the shipping estimator located at the bottom of the shopping cart page will give you a shipping cost based on your specific postal code. Let me know if you need any further technical information or help placing your order. In either case I will be glad to assist!

Link to Single Piece Exhuast Conversion Kit
http://tinyurl.com/2bsaggz
Regards

Performance Product Technologies/IShopBoating
8002 West 6th Street
Stillwater, OK 74074
(405) 533-3812
Fax (775) 257-1769
sales@perfprotech.com
www.perfprotech.com

From: ProductLeadForm@perfprotech.com [mailto:ProductLeadForm@perfprotech.com]
Sent: Tuesday, February 22, 2011 6:57 PM
To: PPT – Marine Engines & Parts
Subject: Product Lead Question: Exhaust Kit – Mercruiser, 4.3L, Coated (#EK-MERC-43L-C-NS)

Steve writes:
Is this a direct bolt in replacement for the one-piece manifold without haveing to purchase anything else, ie: hoses, brackets etc? Assuming those parts aren’t bad.
This customer was last viewing the following page:
http://www.perfprotech.com/store/product/Exhaust-Kit-Mercruiser-43L-Coated-EK-MERC-43L-C-NS,75396.aspx

  • Share/Bookmark