Archive for March, 2011

Eric,

Thanks for your inquiry and the opportunity at earning your business. Using the link below you can add your selected product(s) to your shopping cart and the shipping estimator located at the bottom of the shopping cart page will give you a shipping cost based on your specific postal code. Let me know if you need any further technical information or help placing your order. In either case I will be glad to assist!

Link to Volvo Exhaust Manifolds
http://tinyurl.com/348o3vy
Regards

Performance Product Technologies/IShopBoating
8002 West 6th Street
Stillwater, OK 74074
(405) 533-3812
Fax (775) 257-1769
[email protected]
www.perfprotech.com

eric writes:
the best exhaust manifolds you have for a 2001 4.3 gi volvo penta engine and how much?

Pete,

Thanks for your inquiry and the opportunity at earning your business. Unfortunately none of the major marine manufacturers actually offer short blocks any longer because there are too many issues that result from short blocks versus longblocks. Short blocks cannot be completely tested after manufacturing, and also too many marine engine related issues result from installing bad cylinder heads onto a fresh remanufactured short block. The cost difference between the two was only about $400 and therefore they all felt it was well worthwhile to sell a longblock versus shortblock. The longblocks come with a complete gasket set as required for reinstalling your accessories. Let me know if you need any further technical information or help placing your order. In either case I will be glad to assist!

Regards

Performance Product Technologies/IShopBoating
8002 West 6th Street
Stillwater, OK 74074
(405) 533-3812
Fax (775) 257-1769
[email protected]
www.perfprotech.com

Pete Writes:
Is this motor available in a short block and what is the price? Shipping to Northwest Arkansas, Zip 72715? I would need the top end gasket set also. Thanks, Pete
This customer was last viewing the following page:
/sale-engine-gm-1996-newer-vortec-50l-v8-carb-mpi-stand-rot-non-tin-gm305lf/product/242645

Mads,

Thanks for your inquiry and the opportunity at earning your business. Using the links below you can add your selected product(s) to your shopping cart and the shipping estimator located at the bottom of the shopping cart page will give you a shipping cost based on your specific postal code. Let me know if you need any further technical information or help placing your order. In either case I will be glad to assist!

Link to Standard Capacity Full Cooling System
http://tinyurl.com/2866pe8

Link to High Capacity Full Cooling System
http://tinyurl.com/yh3o949

Link to High Capacity ½ Cooling System
http://tinyurl.com/ykghg7m

Link to Technical Articles
http://tinyurl.com/25soscd

Regards

Performance Product Technologies/IShopBoating
8002 West 6th Street
Stillwater, OK 74074
(405) 533-3812
Fax (775) 257-1769
[email protected]
www.perfprotech.com

Mads writes:
Hello do you send freshwater cooling system to Denmark? And what kit fit on my mercruiser 4,3 v6 1994 with v-belt

Terry,

Thanks for your inquiry and the opportunity at earning your business. Using the link below you can add your selected product(s) to your shopping cart and the shipping estimator located at the bottom of the shopping cart page will give you a shipping cost based on your specific postal code. Let me know if you need any further technical information or help placing your order. In either case I will be glad to assist!

Link to Aluminum Exhaust Kit
http://tinyurl.com/ycbfllr

Link to Tech Article
http://tinyurl.com/nkouoc

Regards

Performance Product Technologies/IShopBoating
8002 West 6th Street
Stillwater, OK 74074
(405) 533-3812
Fax (775) 257-1769
[email protected]
www.perfprotech.com

Terry writes:
Do you have a coated aluminium exhaust solution for a Mercruiser 1998 5.0L V8 please. It is a Vortec engine. Terry

Patrick,

Thanks for your inquiry and the opportunity at earning your business. As indicated in the product title this is a longblock not a complete drop in motor. I’ve atatched several links which should be helpful for you as you start your investigation. Please note that the 8.1L engine was dropped last year so there really are not any NEW complete motor options any longer, just the bobtail. Using the link below you can add your selected product(s) to your shopping cart and the shipping estimator located at the bottom of the shopping cart page will give you a shipping cost based on your specific postal code. Let me know if you need any further technical information or help placing your order. In either case I will be glad to assist!

Link to Terminology Help
/blog/articles/repower-engine-search_main

Link to New 8.1L Longblock
http://tinyurl.com/4aollcx

Link to Drop In Motor Options
http://tinyurl.com/2483e6s

Regards

Performance Product Technologies/IShopBoating
8002 West 6th Street
Stillwater, OK 74074
(405) 533-3812
Fax (775) 257-1769
[email protected]
www.perfprotech.com

Patrick writes:
I need a replacement engine, i have a 8.1 horizon now that seawater entered. Is this for a complete drop in engine, is it a mercruiser? WIll i need parts from my other engine?
This customer was last viewing the following page:
/new-gm-longblock-81l496cid-375hp-81496std/product/243346

Jens,

Thanks for your inquiry and the opportunity at earning your business. There willnot be any “full” closed cooling systems available for the motor making more than 400 Hp. The MFH-5374 is designed for engines making up to 400 Hp. Let me know if you need any further technical information or help placing your order. In either case I will be glad to assist!

Regards

Performance Product Technologies/IShopBoating
8002 West 6th Street
Stillwater, OK 74074
(405) 533-3812
Fax (775) 257-1769
[email protected]
www.perfprotech.com

Subject: Product Lead Question: SALE – Mercruiser Big Block V8 454/502 V-Belt & Serpentine Belt, Carb, EFI, & L29 7.4L MPI (Not 454/502 Mag MPI) *High Capacity* Sterndrive, Inboard and V-Drive Models (Full System) (#MFH-5374)

jens writes:
Hello. Will this kit MFH 5374 fit on my Mercriuser Hp500 470hp? What kit can you recondmend me, it must be a full system. Regards. Jens henrik vinther
This customer was last viewing the following page:
/sale-mercruiser-big-block-v8-454502-v-belt-serpentine-belt-carb-efi-l29-74l-mpi-not-454502-mag-mpi-high-capacity-sterndrive-inboard-and-v-drive-models-full-system-mfh-5374/product/247281

Peter,

Yes if it is a Mercruiser motor they will be the style below. However there is 2 things we need to have you verify, or just send me a picture of your motor with the exhaust shown and I’ll identify them for you.

1. Do you have spacers between the manifold and elbow?
2. Do you have the stainless steel or cast iron elbows.

Check out this link to help identify these questions
http://tinyurl.com/yjkmkkn

Regards

Performance Product Technologies/IShopBoating
8002 West 6th Street
Stillwater, OK 74074
(405) 533-3812
Fax (775) 257-1769
[email protected]
www.perfprotech.com

peter writes:
I have a 1992 searay with a 454 merc,I don’t know what maofolds I need.Not sure if they are all the same for all big blocks.
This customer was last viewing the following page:
/exhaust-kit-mercruiser-big-v8-coated-ek-merc-bb-c-ns/product/248048

Carta,

As long as you do not have the GT-40 performance heads the FO351LA/RA should be fine.

We are out of stock–I need 2 weeks to  build for you.

Regards

Performance Product Technologies/IShopBoating
8002 West 6th Street
Stillwater, OK 74074
(405) 533-3812
Fax (775) 257-1769
[email protected]
www.perfprotech.com

Carta writes:
My block casting numbers F4TE 6015 AA 17 351 5.8 FI
This customer was last viewing the following page:
/58l-351-cu-in-small-v8-1969-1987-235-250-hp-fo351la/product/242663

Ray,

Thanks for your inquiry and the opportunity at earning your business. Using the link below you can review the instructions link within the product details and add your selected product(s) to your shopping cart and the shipping estimator located at the bottom of the shopping cart page will give you a shipping cost based on your specific postal code. Let me know if you need any further technical information or help placing your order. In either case I will be glad to assist!

Link to Cooling System
http://tinyurl.com/nksft6

Regards

Performance Product Technologies/IShopBoating
8002 West 6th Street
Stillwater, OK 74074
(405) 533-3812
Fax (775) 257-1769
[email protected]
www.perfprotech.com

Ray writes:
Whats included in the kit?
This customer was last viewing the following page:
/volvo-2000-2002-43l50l57l-efi-models-half-system-v114/product/242542

Ed,

Thanks for your inquiry and the opportunity at earning your business. Using the link below you can add your selected product(s) to your shopping cart and the shipping estimator located at the bottom of the shopping cart page will give you a shipping cost based on your specific postal code. If you order 2 kits by 3/31 before pricing increases we will offer you a $50 discount on the order. Let me know if you need any further technical information or help placing your order. In either case I will be glad to assist!

Link to Cooling Systems
http://tinyurl.com/4gpokx3

Regards

Performance Product Technologies/IShopBoating
8002 West 6th Street
Stillwater, OK 74074
(405) 533-3812
Fax (775) 257-1769
[email protected]
www.perfprotech.com

ED writes:
I’m looking for two kits ti install on some custom engines and need pricing and shipping time. Thank you
This customer was last viewing the following page:
/high-performance-big-block-v8-high-capacity-up-to-600hp-half-system-mfh-5403/product/247282