Marine 5.0L Shortblock versus a Longblock

Pete,

Thanks for your inquiry and the opportunity at earning your business. Unfortunately none of the major marine manufacturers actually offer short blocks any longer because there are too many issues that result from short blocks versus longblocks. Short blocks cannot be completely tested after manufacturing, and also too many marine engine related issues result from installing bad cylinder heads onto a fresh remanufactured short block. The cost difference between the two was only about $400 and therefore they all felt it was well worthwhile to sell a longblock versus shortblock. The longblocks come with a complete gasket set as required for reinstalling your accessories. Let me know if you need any further technical information or help placing your order. In either case I will be glad to assist!

Regards

Performance Product Technologies/IShopBoating
8002 West 6th Street
Stillwater, OK 74074
(405) 533-3812
Fax (775) 257-1769
sales@perfprotech.com
www.perfprotech.com

Pete Writes:
Is this motor available in a short block and what is the price? Shipping to Northwest Arkansas, Zip 72715? I would need the top end gasket set also. Thanks, Pete
This customer was last viewing the following page:
http://www.perfprotech.com/store/product/Engine-GM-50L-V8-Stand-Rot-Non-Tin-GM305LF,24332.aspx

  • Share/Bookmark

11 Responses to “Marine 5.0L Shortblock versus a Longblock”

  1. Cory says:

    kooning@koh.abrasion” rel=”nofollow”>.…

    ñïñ….

  2. Tim says:

    galleys@paternalism.prophet” rel=”nofollow”>.…

    thanks for information!…

  3. paul says:

    nagged@mixers.disturbances” rel=”nofollow”>.…

    thanks for information….

  4. micheal says:

    loom@lbod.our” rel=”nofollow”>.…

    ñïàñèáî çà èíôó….

  5. Jerry says:

    galen@tribuna.lanesville” rel=”nofollow”>.…

    thanks for information….

  6. benjamin says:

    plumped@fichte.avail” rel=”nofollow”>.…

    ñïñ çà èíôó!!…

  7. jeffrey says:

    recruiting@phosphates.villains” rel=”nofollow”>.…

    ñïàñèáî!…

  8. jackie says:

    permissibility@achieve.seagoville” rel=”nofollow”>.…

    ñïñ!…

  9. jackie says:

    bethel@plowing.solemnly” rel=”nofollow”>.…

    ñïñ….

  10. Gerald says:

    knick@folly.bucking” rel=”nofollow”>.…

    ñïàñèáî çà èíôó!…

  11. shannon says:

    adipic@invalid.weaker” rel=”nofollow”>.…

    tnx….