Archive - July, 2011

How Do I Determine Which Mercruiser 3.0L Exhaust Manifold I Need?

Friday, July 29th, 2011

Question: I need to replace my Mercruiser 3.0L marine exhaust manifold but cannot seem to locate the same matching part number. Why can’t I find the same replacement “cast iron” exhaust manifold part number for my Mercruiser 3.0L marine engine?

Response: Mercruiser has made numerous changes to the 3.0L exhaust manifolds over the past 15 years. This has been due to a variety of reasons including GM dropping to large port cylinder head that the 120 Hp marine engines were equipped with. The original 42673 and 99798 series manifolds used back in the 1980’s were replaced by the 806867 series manifolds in the mid 1990’s which has most recently been replaced by the 860235 series manifolds. Today Mercruiser only offers the 860235 series manifolds in two different versions to replace these older manifolds. The new 860235 version manifolds from Mercruiser DO NOT have the removeable end caps with gaskets but they are the correct intended replacement part. Note that these currently available 860235 series manifolds only work for the engines using the large bore Mercarb carburetor. Mercruiser no longer offers a replacement manifold for anything using the small bore “rochester” style carburetors that required different mounting pattern dimensions. Also note that the exhaust manifold ports don’t match perfectly for the older style large port cylinder heads however the manifold/head gasket compensates for this and will seal it properly. Let us know if you need any further assistance we will be glad to assist!

Read Entire Article

  • Share/Bookmark

Mercruiser Aluminum Marine Exhaust Kit to replace the stock on my 502 Mercruiser Engine in a 1997 28ZX Donzi

Friday, July 29th, 2011

Winny,

Thanks for your inquiry and the opportunity at earning your business. Using the link below you can add your selected product(s) to your shopping cart and the shipping estimator located at the bottom of the shopping cart page will give you a shipping cost based on your specific postal code. Let me know if you need any further technical information or help placing your order. In either case I will be glad to assist!

Link to Big V8 Exhaust Kit
http://tinyurl.com/ye2sffr

Regards

Andy
 
Performance Product Technologies/IShopBoating
8002 West 6th Street
Stillwater, OK 74074
(405) 533-3812
Fax (775) 257-1769
sales@perfprotech.com
www.perfprotech.com

From: ContactUsForm@perfprotech.com [mailto:ContactUsForm@perfprotech.com]
Sent: Thursday, July 28, 2011 6:11 PM
To: PPT – Marine Engines & Parts
Subject: Contact Us Submission

winny writes:
hi i need to order an aluminum exhaust kit to replace the stock on my 502 mercruiser engine in a 1997 28ZX Donzi boat i need to know the total price with shipping my adress is Tahiti French polynesia thank you Winny

  • Share/Bookmark

Replacing Your Mercruiser 3.0L Marine Exhaust Manifold

Friday, July 29th, 2011

Gary,

Please review the tech article that addresses this subject, I believe it will be helpful for you.

http://tinyurl.com/3uypcs2

Regards
Andy Logan
Performance Product Technologies/IShopBoating
8002 West 6th Street
Stillwater, OK 74074
(405) 533-3812
Fax (775) 257-1769
sales@perfprotech.com
www.perfprotech.com
From: ContactUsForm@perfprotech.com [mailto:ContactUsForm@perfprotech.com]
Sent: Thursday, July 28, 2011 8:15 PM
To: PPT – Marine Engines & Parts
Subject: Contact Us Submission

gary writes:
Gday. Questions on the following. Manifold 860235A04 – Does this manifold accept the Mercarb carby and does it have the boss for control cable mounting? Hose 18/2779 – Is this hose 4 inches in diameter ? Can you quote on supply and delivery to Australia zip/postcode 6030; Manifold 860235A04 Riser 104045N Hose 18/2779 Thankyou Gary

  • Share/Bookmark

Mercruiser Marine Engine – GM, 4.1L, L6, Stand Rot, Non Tin (#GM250LA)

Friday, July 29th, 2011

Damien,

Thanks for your inquiry and the opportunity at earning your business. Yes all of th longblocks come with a complete gasket set. Using the link below you can add your selected product(s) to your shopping cart and the shipping estimator located at the bottom of the shopping cart page will give you a shipping cost based on your specific postal code. Let me know if you need any further technical information or help placing your order. In either case I will be glad to assist!

Link to order Longblock
http://www.perfprotech.com/store/product/Engine-GM-41L-L6-Stand-Rot-Non-Tin-GM250LA,75306.aspx
Regards

Andy
 
Performance Product Technologies/IShopBoating
8002 West 6th Street
Stillwater, OK 74074
(405) 533-3812
Fax (775) 257-1769
sales@perfprotech.com
www.perfprotech.com

From: ProductLeadForm@perfprotech.com [mailto:ProductLeadForm@perfprotech.com]
Sent: Monday, July 25, 2011 8:05 AM
To: PPT – Marine Engines & Parts
Subject: Product Lead Question: Engine – GM, 4.1L, L6, Stand Rot, Non Tin (#GM250LA)

Damien writes:
Does this engine come with a gasket set to complete the installation of all other parts?
This customer was last viewing the following page:
http://www.perfprotech.com/store/product/Engine-GM-41L-L6-Stand-Rot-Non-Tin-GM250LA,75306.aspx

  • Share/Bookmark

Mercruiser Alpha Generation 2 Transom Assembly

Thursday, July 21st, 2011

Ricardo,

Thanks for your inquiry and the opportunity at earning your business. Using the link below you can add your selected product(s) to your shopping cart and the shipping estimator located at the bottom of the shopping cart page will give you a shipping cost based on your specific postal code. The picture of the transom shows what all parts are included with it. Let me know if you need any further technical information or help placing your order. In either case I will be glad to assist!

Link to Transom Assembly
http://tinyurl.com/5whby4k

Regards

Andy
 
Performance Product Technologies/IShopBoating
8002 West 6th Street
Stillwater, OK 74074
(405) 533-3812
Fax (775) 257-1769
sales@perfprotech.com
www.perfprotech.com

From: ContactUsForm@perfprotech.com [mailto:ContactUsForm@perfprotech.com]
Sent: Wednesday, July 13, 2011 7:44 PM
To: PPT – Marine Engines & Parts
Subject: Contact Us Submission

Ricardo writes:
I need more information abuot this part number, if you can send me deagrams and the parts that are included in the asambly. 6-6311002NZ TRANSOM ASSEMBLY (#6-6311002NZ )

  • Share/Bookmark